1
/
6
mAT-1500Pro ANTENNA TUNER OPERATION MANUAL
Thank you for choosing this our product.
Please
READ ALL INSTRUCTIONS
carefully and completely before using this tuner.
■
IMPORTANT
◆
NEVER
touch the antenna or antenna connector with your hand when the transmitter is
transmitting, it will cause burns!
◆
NEVER
use the antenna tuner during a lightning storm. It may result in an electric shock,
cause a fire or damage the tuner. Always disconnect the antenna before a storm.
◆
NEVER
operate the tuner with its cover removed. Contact with the components inside
the tuner while transmitting will result in painful RF burns.
◇
Always turn your transmitter off before plugging or unplugging anything, otherwise it
would be damaged.
◇
The tuner is designed for indoor operation only
，
it is not waterproof. If you use it outdoors,
you must protect it from rain, dew and steam.
◇
We cannot guarantee the mAT-1500Pro tuner will work well with those YAESU
transmitters which are released later than the tuner.
■
INTRODUCTION
The mAT-1500Pro is a multipurpose high-power automatic antenna tuner that can match almost
all transmitters and amplifiers. The maximum RF power allowed is 1500 watts (SSB), and two
antennas can be connected at the same time. According to the different connected transmitters,
the tuner has three working modes, YAESU mode, ICOM&KENWOOD mode and GENERAL
mode. The tuner can automatically determine and match the type of the currently connected
transmitters to minimize the manual operation and enhance the automation and convenience of
the wireless communication system.
Front:
There are 3 indicator lights on the left to show the current mode of the tuner. There are 4
buttons& indicator lights on the right to operate the tuner and indicate the status.
