Audio International, Inc
.
RCD-201-01-x Installation & Operation Manual
Document # 540225, Rev IR, 01/2001
Page 8 of 18
2.2
If damage has occurred during shipping, a claim should be filed with Audio
International WITHIN 24 hours and a Return Request Authorization
Number shall be obtained from AI. Refer to the front cover of this manual
for address and telephone number of Audio International, Inc. Repackage
the unit in its original packaging materials and return it to AI following
instructions given by the AI representative. If no return is necessary,
retain the packing list and the packing materials for storage.
3.0
Cautions & Warnings
3.1 It is important to do a pin-to-pin power and ground check on all
connectors. Ensure that power and ground are applied only where
specified. Damage to the unit may result if power or ground is applied to
the wrong points.
3.2
DO NOT connect or disconnect the unit while power is applied.
3.3
DO NOT remove any factory-installed screws. Damage to the unit may
result and void any warranties.
3.4 DO NOT drop the unit or subject it to strong shock. The unit contains
glass parts that may break or crack.
3.5
DO NOT place foreign objects into openings. Contact with foreign objects
may result in dangerous voltage or electric shock.
3.6
DO NOT touch the liquid crystal fluid if the LCD is damaged or broken. If
the fluid from the LCD display contacts your body or clothing, wash it off
with soap immediately.
3.7 DO NOT place near hot air ducts, heating elements, or other heat
sources.
3.8
DO NOT use this unit near water, moisture, or volatile sprays. Do not use
any type of solvent when cleaning surface; damage may occur.
3.9
DO NOT leave tape cassettes loaded in the unit with no power applied.
Damage to the unit may occur.
3.10 No scheduled maintenance is required to ensure continued airworthiness.
3.11 ESD (Electro Static Discharge) guidelines shall be followed.
