Audio International, Inc.
DVD-021-0x-x Installation & Operation Manual
Document # 540125, Rev B, 12/2000
Page 7 of 31
7.7
DO NOT clean with solvents or other chemical. To clean dirty discs, wipe
gently with a soft, lint-free cloth. Start from the center of the disc and
move outward in a circular motion. Dust or fingerprints on the disc may
cause sound or picture difficulties.
7.8
DO NOT use liquid or aerosol cleaners on the DVD unit. When cleaning
heavy dirt from the unit, soak a soft cloth in a weak detergent solution.
Wring out excess liquid and gently wipe the unit. Dry the unit thoroughly
with a soft cloth.
7.9
NO scheduled maintenance is required to ensure airworthiness.
SECTION II - INSTALLATION
1.0
Prior to Installation
1.1
During the design and layout of the aircraft cabin, careful consideration of
the location of this and all other audio/visual modules is necessary. Some
of the items to be considered include:
•
Space
•
Available power supply
•
Environmental conditions (temperature, humidity, etc.)
•
Length of cable runs
•
Location of other aircraft systems (oxygen delivery)
1.2
The DVD-021-0x-x shall be installed to conform to the standards
designated by the customer, installing agency, and existing conditions as
to the unit location and type of installation.
1.3
Mounting screws are required to secure the unit. Long low-level audio
runs may introduce noise into the audio signal. Refer to Section 6.0 for
mounting hole diameters and configurations.
1.4
The DVD-021-0x-x shall not be mounted on its side, at an angle or in an
inclined position.
2.0
Unpacking and Inspection
2.1
Carefully open the packaging and remove the DVD-021-0x-x. Verify that
all components have been included in the package per the packing list.
Inspect the unit for shipping damage.
