Audio International, Inc.
DVD-021-0x-x Installation & Operation Manual
Document # 540125, Rev B, 12/2000
Page 28 of 31
4.3.2.3 When AUDIO OUT SEL. is selected, select the output
sound type AC-3 or PCM by pressing or and then
pressing ENTER. Select the output sound type according
to the system connection.
4.3.2.4 When D RANGE CONTROL is selected, select ‘ON’ or
‘OFF’ by pressing or and then press ENTER. By
selecting ‘ON’, the dynamic range is reduced. By selecting
‘OFF’, the full dynamic range is maintained. This function
works on playback of Dolby Digital (AC-3) recorded discs
only. The level of Dynamic Range Reduction may differ
depending on the DVD discs.
4.3.2.5 The VOCAL KARAOKE setting is not intended for use with
the DVD-021-0x-x unit.
4.3.2.6 Press SET UP and the setting screen will disappear. If the
RETURN button is pressed while a menu appears on the
screen, the screen will return to the previous menu screen
displayed.
4.3.3 To Specify Function Settings:
4.3.3.1 After selecting FUNCTION on the SET UP MENU screen,
press or to select the item. Press ENTER, the setting
screen of the selected item will appear.
4.3.3.2 When BLACK LEVEL is selected, select a preferred black
level by pressing or and then pressing ENTER. Normal
is standard black level and enhanced is expanded black
level.
4.3.3.3 When TITLE STOP is selected, select ‘ON’ or ‘OFF’ by
pressing or and then press ENTER. A selection of
‘OFF’ allows the unit to continue after playback of a title is
completed, and a selection of ‘ON’ allows the unit to stop
after playback of a title is completed.
4.3.3.4 The REMOTE CONFIRM setting is not intended for use
with the DVD-021-0x-x unit.
4.3.3.5 When OSD is selected, select ‘ON’ or ‘OFF’ by pressing
or and then press ENTER. A selection of ‘ON’ allows for
the operational modes to be displayed on-screen (e.g.
PLAY), and a selection of ‘OFF’ allows for the operational
modes not to be displayed.
