Dante-MY16-AUD2 User Guide
Copyright © 2016 Audinate Pty Ltd. All rights reserved.
-43-
Configuring your Yamaha Equipment
The host Yamaha equipment in which you have installed your cards needs to be configured to match your
desired clock settings and sample rate. Refer to the relevant Yamaha equipment manual for specific
instructions on configuring sample rates and word clock for that equipment.
Setting up clocking can be confusing: please refer to
Dante Synchronization and Clocking
for detailed
information and diagrams on setting up system clocking.
Key configuration checks for the host Yamaha equipment for your Dante-MY16-AUD2 card:
If:
n
You want the host Yamaha equipment to derive its clock from Dante
You will need to ensure that:
n
None of your Dante-MY16-AUD2 cards are set to 'Enable Sync To External'
n
Your Yamaha host equipment has its Word Clock set to one of the Dante-MY16-AUD2 card slots
If your Dante-MY16-AUD2 cards are set to 88.2kHz or 96kHz sample rate, you also need to set the
Yamaha host equipment to 'double-speed' for the Dante-MY16-AUD2 card slots (not double-channel).
If:
n
You want the Dante network to derive its clock from its host Yamaha equipment
You need to ensure that:
n
The Yamaha host equipment has its Word Clock set to Internal
n
All installed Dante-MY16-AUD2 cards are set to the same sample rate as the Yamaha Internal clock
n
Just one of the Dante-MY16-AUD2 cards has 'Enable Sync To External' set (via the Clock Status
tab in Dante Controller)