31
3. Audio transmission (via Bluetooth)
The transmission of signals from external audio sources that
comply with A2DP-Bluetooth-standard can be achieved in two
steps.
Step one:
Connect (pair) the audio source to the multistreamer.
Step two:
Transmit the audio signal from the multistreamer to
the hearing aids.
3.1 Establishing a connection to audio source
Your audifon multistreamer can be con-
nected to compatible Bluetooth devices as
follows:
1. Start connection mode of transmitting
device or audio source. See device’s user
manual for further instructions.
2. When the transmitter is in connection
mode, press and hold the Bluetooth button
on the multistreamer for eight seconds un-
til the LED display flashes red and blue. A
four digit transmission code may be required
when pairing an external device.In this
case, enter 0000 on the external device.
3. Following successful connection between
devices, the multistreamer display will
flash blue every five seconds to indicate
continual functioning connection.
Advice:
If you encounter difficulties estab-
lishing a connection, see chapter six (Dealing
with problems).
R
R L
L
1
2
+
3
4
EN