background image

IMPORTANT SAFETY INFORMATION

Please read all of these instructions and save them for later reference 
before connecting the USB cable and powering up EVO 4.

EVO 4 itself does not operate with any high voltage mains supply 
inside the unit but appropriate safety measures should still be adhered 
to prevent electrical shock and fire hazards.

In the event of a unit failure, do not attempt to open the EVO 4 yourself. 
Please contact Audient support so that a suitable method of 
repair or replacement can be recommended.

support.audient.com

Consult a qualified technician if you suspect difficulties. 

Do not attempt to tamper with the unit whilst connected or 
disconnected - 

HAZARDOUS TO HEALTH

SAFETY

SAFETY

To reduce risk of fire or electric shock, 

do not expose this apparatus to rain or moisture

No user serviceable parts inside

Please refer servicing to qualified service personnel

WARNING

01

  

Read these instructions

02

  

Keep these instructions

03

  

Heed all warnings

04

  

Follow all instructions

05

  

Do not use this equipment near water

06

  

Clean only with a dry cloth

07

  

Do not install near any heat sources such as radiators, heat

  

registers, stoves, or other equipment (including amplifiers) that 

 

  

produce heat

08

  

Protect cables from being walked on or pinched particularly

  

at convenience receptacles, and the point where they exit 

  

  

from the equipment

09

  

Only use attachments/accessories specified by the manufacturer

 1 0

  

Switch off your computer and unplug this equipment during 

  

  

lightning storms or when unused for long periods of time

11

  

Refer all servicing to qualified service personnel. Servicing is 

  

required when the equipment has been damaged in any way, liquid 

 

  

has been spilled or objects have fallen into the equipment, the 

 

  

equipment has been exposed to rain

 

or moisture, does not operate 

 

  

normally or has been dropped

Summary of Contents for EVO 4

























Reviews: