Bluetooth
®
, Voice Recognition & Media
Warnings: Bluetooth Audio Player
See Bluetooth Audio Player in your Owner’s Manual for more detailed information and for important safety warnings.
Warnings: Voice Recognition System
See Voice Recognition System in your Owner’s Manual for more detailed information and for important safety warnings.
Warnings: Media
See Media in your Owner’s Manual for more detailed information and for important safety warnings.
Upper display shown
Media
The Multi Media Interface can access multiple media sources, including
compatible Bluetooth-connected devices, USB-connected devices,
onboard Radio/Satellite sources, online media (via Wi-Fi hotspot) and
SD cards. Bluetooth streaming is not available when Apple CarPlay
®
is
active. To access a media source:
1.
Select
Media
on the upper display.
2.
Select
Source
and choose from the available options.
To connect additional mobile devices (after two phones are paired):
1.
Select
Media
and then
Source
.
2.
Select
Connect external device
.
3.
Activate the Bluetooth menu on the external device.
4.
Select
New connection
and select from available Bluetooth devices displayed. Press the Refresh icon
if the device
is not displaying.
Bluetooth
®
Technology
Initial Setup
Once a compatible phone is paired, it will reconnect each time you start
the vehicle.* Your contact list will automatically synchronize, allowing you
to access contacts and make and receive calls through the Infotainment
system. Bluetooth is not available when Apple CarPlay
®
is active.
To pair a compatible phone:
1.
Turn ignition on with vehicle in Park.
2.
Activate your phone’s Bluetooth.
3.
Open the Bluetooth menu on your phone, ensure “Audi MMI XXXX”
(last four digits of VIN) appears as an option.
4.
Select
Phone
on the upper display to view available Bluetooth devices.
5.
Select
Connect mobile device
.
6.
Select your device from the device list. Press the Refresh icon
on the upper
display if the device is not displaying.
7.
Select
Pair
on your device once the PIN on your phone matches the one
generated by the MMI. This confirmation step pairs your phone.
8.
Select
Allow
on your device to sync contacts.
• Open the Bluetooth submenu
on your device and enable Show Notifications,
Sync Contacts and Apple CarPlay for iOS devices.
Some devices may require a selection to allow access to the address book.
*Some phones may require a response to automatically connect upon re-entering the vehicle. Once paired, the Bluetooth symbol appears on the
upper display status bar along with network strength bars and will be displayed whenever a paired phone is connected to the Infotainment system.
Switch Between Paired Phones
A primary and secondary phone can be paired to the vehicle. To swap the primary/secondary order, from the upper display,
select
Phone
. The secondary will now be the primary and vice-versa.
Voice Recognition
Enable online speech dialog system:
1.
On the upper display, select
Settings
then
General
.
2.
Select
Speech dialog system
.
3.
Consent to Speech dialog system online recognizer, provide consent by sliding button to the right.
4.
A short press of the Voice Recognition button
will activate MMI voice recognition.
•
You can also control audio, navigation and climate control functions with voice recognition commands, such as
“Play FM 103.5”
or
“Set the temperature to 70 degrees.”
•
When a compatible device is connected, a long press of the Voice Recognition button
will enable voice
recognition with your phone’s digital assistant. Use commands such as
“Call Mary Smith, mobile”
or
“Call last
number dialed.”
To switch voice recognition system off:
•
Press and hold the Voice Recognition button
on the multifunction steering wheel. You can also say
“Cancel”
or
press Cancel on the touchscreen display.
