Fig. 478: Identifying Bolts, Control Module, And Electrical Harness Connector
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Connect electrical harness connectors - arrows -.
Install bolts - 1 - and tighten to 2 Nm.
Adapt Level Control System Control Module J197 again --> Level Control System Control Module,
adjusting again.
Level Control System Control Module, adjusting again
Connect VAS 5051 A , perform vehicle-specific entries in Guided Fault Finding and select
"Function/component selection" via Goto button --> VAS 5051 , connecting and selecting functions.
Then
"Suspension"
"Level control system".
"On Board Diagnostic (OBD) capable systems"
"Functions of Level Control System Control Module -J197-".
"Replace Level Control System Control Module -J197-".
Body acceleration signal of front/rear body acceleration sensors, checking
Connect VAS 5051 A , perform vehicle-specific entries in Guided Fault Finding and select
"Function/component selection" via the Goto button --> VAS 5051 , connecting and selecting functions
.
Then
"Suspension"
"Level control system".
"On Board Diagnostic (OBD) capable systems"
"Functions of Level Control System Control Module -J197-".
2008 Audi A6 Quattro
SUSPENSION Suspension, Wheels, Steering
FIXYOURCAR
1:42:01 AM
Page 21
