– Place the actuators in the installation position, attach the
connectors, position and tighten the mountings -1-.
– Position the clamping sleeves -2- central to the separating
cut.
● Installation position: screw fittings forward.
– Before tightening the clamping sleeves -2-, set the exhaust
system so there is no tension
⇒
Rep. gr. 26 and
⇒
Fig. “Aligning the exhaust tips” on page 16
Aligning the exhaust tips
Dimension -x- left = dimension -x- right
– Rotate the clamping sleeves so that the screw ends do not
protrude over the bottom edge of the clamping sleeve.
Tightening torques
⇒
Page 13
3.8
Final tasks
– Connect the battery -A-
⇒
Rep. gr. 27.
– Carry out a functional check.
Installation instructions - Audi A4/A5 (B8 series) 2008
▶
Edition 11/2012
16
3 Sequence of operations
Summary of Contents for 2008 A5
Page 20: ......
