Audi 2003 A8, Workshop Manual

Page: 209 / 252

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Coolant pipe (bottom front)
❑ Removing and installing
⇒ page 204
2 - 9 Nm
3 - Coolant pipe (front)
❑ Removing and installing
⇒ page 205
4 - 8 Nm + turn 90° further
❑ Renew
5 - Coolant hoses
❑ To alternator
6 - Coolant pipe (right-side)
❑ Removing and installing
⇒ page 211
7 - 9 Nm
8 - Coolant hose
9 - O-ring
❑ Renew
10 - Coolant hose
❑ To intake manifold
11 - 9 Nm
12 - Coolant temperature
sender - G62-
❑ Removing and installing
⇒ page 198
13 - Retaining clip
14 - O-ring
❑ Renew
15 - Coolant pipe (rear)
❑ Removing and installing ⇒ page 212
16 - 9 Nm
17 - Coolant hose
18 - O-ring
❑ Renew
19 - 9 Nm
20 - Coolant pipe (left-side)
❑ Removing and installing ⇒ page 207
21 - Coolant pipe (bottom left)
❑ Removing and installing ⇒ page 208
22 - 9 Nm
23 - 9 Nm
24 - Coolant hose
❑ To coolant pump housing
25 - O-rings
❑ Renew
Audi A8 2003 ➤
10-cylinder direct petrol injection engine (5.2 ltr. 4-valve), mechanics - Edition 10.2013
1. Cooling system
203