h. EIS (Electronic Image Stabilisation)
Select EIS (will be highlighted in RED) and select OK. This gives you the option to
increase the stability of the video (when the wearer is running for example).
There are two settings to select from: On and Off
Press “Up” or “Down” to select the required resolution and press “OK” to confirm. Press
“Back” to return to standby.
i. Motion detection
Select MOTION DETECTION (will be highlighted in RED) and select OK. This gives you
the option for the Camera to detect and record when motion is seen by the camera lens.
There are four settings to select from: Off, Low, Medium and High
Press “Up” or “Down” to select the required resolution and press “OK” to confirm. Press
“Back” to return to standby.
NOTE:
Once the setting for Motion detection has been changed (Low, Medium, High), the
“Record” button
MUST
be pressed to activate Motion detection.
The individual settings record video according to the change degree of the screen area
(Low, Medium or High). When the camera detects movement, it will start recording and
continue to record while movement is seen. If movement stops, recording will continue for
a further 18 seconds and then stop until the next movement is seen
i. Photo Size
Select PHOTO SIZE (will be highlighted in RED) and select OK. This gives you the option
to change the photo resolution sizes.
There are seven settings to select from:
2 / 3 / 5 / 8 / 12 / 16 / 30 Megapixels
Press “Up” or “Down” to select the required resolution and press “OK” to confirm. Press
“Back” to return to standby.
