k. Pre Event Recording
Select PRE_RECORDING (will be highlighted in RED) and select OK. This gives you the
option to select Pre-Event Recording.
There are two options to select from:
Off
– No pre-event recording
On
– the camera will pre-record for up to 25 seconds prior to the pressing of the
“Record” button (the actual pre-record time will depend on the resolution set e.g.
1080p
– 30fps resolution will give 25 seconds, lower resolutions will give more time
but higher resolutions will give less time).
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Pres
s “Back” to return to standby.
l. Post Event Recording
Select POST_RECORDING (will be highlighted in RED) and select OK. This gives you
the option to select Post Event Recording.
There are six options to select from:
Off
– No post event recording
10, 20, 30, 60 or 300 seconds
– The camera will record for the selected duration
AFTER stopping recording.
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Pres
s “Back” to return to standby.
IMPORTANT NOTE: When POST_RECORDING has been set, the device will continue
to record
, after the “stop recording” button has been pressed, until the time period
(e.g. 20 seconds) has been reached.
