Service Desk: 0118 923 5645
2. Power and Charging
To turn on the VHC2 unit push and hold the Power Key located on the side of the unit.
The VHC2 will power up and load the home screen.
To turn off the VHC2 unit, ensure you have closed all the current open applications and
push and hold the Power Key. When required, select ‘Power off’ and then ‘OK’.
NOTE:
We advise that you always ensure that the unit is not in Standby mode, as the unit
will still use battery life while in Standby. If the battery runs completely flat then the VHC2
unit will take a while to charge enough to allow normal use.
2.1 Charging the VHC2
The VHC2 is charged via a micro USB slot on the side of the unit.
For best charging results we recommend that you use the VHC2’s docking station.
2.1.1 Quick charge
Charging the VHC2 unit using a wall socket or the docking station for 15 minutes will
allow enough charge to complete one diagnostic check. If the unit is plugged into a
PC to charge allow 30 minutes for enough charge to complete one diagnostic check.
2.1.2 Full charge
To fully charge the VHC2 allow up to 2 hours. To fully charge via a PC allow 5 hours.
3
4
