17
Web-control interface
Start your default web browser and enter the IP address of the embedded web-control
interface in the address bar (The factory default IP address is http://192.168.0.196)
Web-control >> Login
A LOGIN SCREEN SHOULD BE SHOWN HERE..
When accessing the web-control interface of the XMP44, a password should get entered
to control the functions of the system. Two different levels are possible for
administrator
and
user
access.
When logging in using the administrator password, full access is given to all systems functions
and configuration possibilities. (The factory default password for administrator access is
‘XMP’) When logging in using the user password, restricted access for only the basic functions
of the system is given, allowing system control and operation without authorization for
making any changes to the system configuration. (The factory default password for user
access is ‘user’)
After the right password is entered, press the ‘OK’ button, and you will be redirected to the
main screen of the web-control interface.
NOTE
If application specific limitations or restrictions for certain functions are required, the system
control can be done through the Audac Touch™ freely available application, which allows
you to create customized control dashboards.
