AUDAC DW5066, User Manual & Installation Manual

Page: 11 / 29

11
After the desired address is selected, click the “Set Address” button. A message will start blinking on
all the DW5066 wall panels connected in your system. When the function selection dial on the wall
panel is pressed, the selected address will be assigned to the corresponding wall panel.
Now, the outputs which should be controlled by means of the wall panels and the selectable inputs
need to be selected. This can be done in the user interface with the two dropdown lists. When the
output or input is selected, it automatically appears inside the listbox. To remove a zone or input from
the listbox, select the desired zone or input in the listbox, and click the “Remove Zone” or “Remove
Input” button.
Next to the listboxes are several selection & checkboxes shown whereby some presets / restrictions
can be made to the corresponding wall panel. After the settings are made, click the “Save to Wall
panel” button on the bottom of the window, and your changes will be uploaded to the wall panel.
Your wall panel is now ready for operation.