AUDAC DW5066, User Manual & Installation Manual

Page: 10 / 29

10
Chapter 2
Quick start guide
This chapter guides you through the setup process for a basic project where a DW5066 wall panel
should be connected to a digital audio matrix. Make sure the digital audio matrix is installed correctly
and is powered off when connecting the DW5066 wall panel.
Connect the DW5066 wall panel to the Matrix system with a twisted pair CAT6 cabling with a
maximum cable length of 300 meters. Make sure the DW5066 is connected to one of the PI ports on
the rear side of the digital audio system (Only PI 1-8 can handle audio inputs).
Go to the setup menu in the web based interface of the digital audio matrix and go to System
configuration. Click on DW5066 to create the desired settings for the DW5066 wall panel.
A unique address should be selected for every connected wall panel. The address for a wall panel
always starts with the letter “W”. When only one wall panel is connected, the most logical way is to
start with address “W001”, and increase the address number for every additional wall panel. (“W002”
for wall panel 2, “W003” for wall panel 3, ...)