background image

6

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

•  ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER 

THROW THEM AWAY

•  ALWAYS HANDLE THIS UNIT WITH CARE

•  CLEAN ONLY WITH DRY CLOTH

•  HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

•  NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR 

SPLASHING LIQUID. NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP 
OF THIS DEVICE

•  DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS 

OR OTHER APPARATUS THAT PRODUCE HEAT

•  DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST, 

HEAT, MOISTURE OR VIBRATION

•  THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

•  PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK

•  ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE 

MANUFACTURER.

•  UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED 

FOR LONG PERIODS OF TIME

•  CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING. 

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF, 
INFORM YOUR VENDOR IMMEDIATELY.

•  ONLY CONNECT THIS UNIT TO A MAINS SOCKET OUTLET WITH PROTECTIVE 

EARTHING CONNECTION

•  THE INSTALLATION, CONNECTION AND CONFIGURATION OF THE DEVICE 

SHOULD BE DONE BY QUALIFIED TECHNICIANS

Summary of Contents for APG20MK2

















Reviews: