background image

3

Introduction

2-Way design wall sound projectors

The ALTIxM series are design wall sound projectors, designed for background and 
foreground music in both indoor and outdoor applications. They are variants of the ALTI 
series pendant loudspeakers allowing the same audio system design and identity for 
throughout the entire installation in case some area’s are not allowing pendant solutions 
being used due to the ceiling heights or structures. Typical applications are big scale 
retail environments, warehouses and other large open spaces

The elegant construction is finished using high grade materials and fitted with premium 
acoustic components. This guarantees clear speech intelligence and a warm and detailed 
sound reproduction.

Mounting the speaker is done through a 2-way revolving mounting bracket system, 
and connections are made through a waterproof AWX-5 connection terminal. An 
innovatively designed rear cover of the speaker can be placed after installation and 
hides the connection. 

The 2-way combination with a coaxially mounted 1” soft dome tweeter and is fitted 
with a phase plug for excellent off axis performance. The high quality polypropylene 
enclosure and acoustic engineering craftmanship guarantees premium performance 
for demanding applications. 

They come in two different models (ALTI4M and ALTI6M) in terms of size and power 
handling. A multi-tapping line transformer allows them to be connected to 70V/100V 
public address systems with various power settings, while connections in low impedance 
(16

Ω

) systems are also possible.

Summary of Contents for ALT4M/B













Reviews: