15
Get
ting R
ead
y
◎
When you operate the product with the specified charger
connected, the product may repeat short-time charging/
discharging resulting in short battery life.
◎
When temperature of environment or the product
becomes extremely high or low, charging may be
stopped. Try to charge the battery as far as possible at
room temperature.
◎
If the charging light blinks in red, check if the product
is correctly connected. If the light keeps blinking,
stop charging and then contact an au shop or Keitai
Guarantee Service Center.
◎
Clean the charging terminal with dry cotton swabs etc.
When it is dirty, the battery may not be charged normally.
◎
Firmly close the external connection terminal cover after
charging to prevent water or dust from getting in. And do
not pull strongly or twist the cover.
◎
If charging is stopped while the charging light is still
turned on, the battery may not be fully charged even with
"
" (Full) displayed. In that case, available time will be
short.
◎
When charging with Desktop Holder (KYV32PUA), do not
use the external connection terminal to charge. Doing so
may not charge properly, and may cause a malfunction.
◎
Do not allow conductive foreign objects (metal fragments,
pencil leads, etc.) to come into contact with or get inside
the connection terminals.
Charging with Desktop Holder
(KYV32PUA)
Charging with supplied Desktop Holder (KYV32PUA) and
Common AC Adapter 05 (sold separately) is explained.
Check the orientation of the microUSB plug
of Common AC Adapter 05 (sold separately)
and insert it straight into the external
connection terminal of Desktop Holder
(KYV32PUA)
Connect the power plug of Common AC
Adapter 05 to an outlet (100V - 240V AC)
Install the product into Desktop Holder
(KYV32PUA)
Check that the charging light on the product lights in red.
When charging ends, the charging light turns off.
