background image

20

shv33̲e̲01.fm
[20/29]

Before you assume that the product is malfunctioning, check the following:

Troubleshooting

Trouble

Detail

Battery usage time is 

short.

Make sure you do not often use the product in 

places where 

 (out of service area) is 

displayed. (

z

P.16)

Make sure the internal battery does not 

approach the end of its service life. Check the 

battery status. (

z

P.11)

Is the internal battery charged enough? (

z

P.11)

Suspend the functions not being used. (

z

P.17)

Cannot make calls.

Is an au Nano IC Card 04 inserted? (

z

P.8)

Make sure “Airplane mode” is not set. (

z

P.18)

Is the power turned on? (

z

P.13)

Cannot receive calls.

Is reception good enough? (

z

P.16)

Is the product within the service area? (

z

P.16)

Make sure “Airplane mode” is not set. (

z

P.18)

Is the power turned on? (

z

P.13)

Is an au Nano IC Card 04 inserted? (

z

P.8)

Cannot hear the other 

party.

Make sure you are not covering the earpiece 

with your ear.

Place the earpiece over your earhole.

Cannot recognize a 

microSD memory card/

Cannot find target data.

Is a microSD memory card inserted properly? 

(

z

P.10)

Make sure data is not saved on the internal 

memory. Data can be saved on the internal 

memory besides a microSD memory card.

Cannot operate the 

keys/touch panel.

Turn off the power and then turn it on.

Is the power turned on? (

z

P.13)

Cannot charge the 

battery.

Is the power plug of the specified charger (sold 

separately) securely plugged into an outlet or a 

cigarette lighter socket? (

z

P.11)

Cannot turn on the 

power.

Is the internal battery charged? (

z

P.11)

Did you hold 

f

 down? (

z

P.13)

Cannot operate/The 

screen does not 

respond/Cannot turn off 

the power.

You can force the power off by holding down 

f

 for at least 8 seconds and releasing your 

finger after the product vibrates. Turn the 

product on again after a while. (

z

P.13)

Cannot operate the 

touch panel as 

intended.

Make sure you are not operating with the tip of a 

fingernail or with foreign object between the 

screen and your fingers.

Restart the product. (

z

P.13)

Screen response is 

slow when you tap on 

the screen/press the 

keys.

Screen response may be slowed down when a 

large amount of data is stored in the product or 

being transmitted between the internal memory 

and a microSD memory card.

An error of the au IC 

card (UIM) or a 

message indicating 

that the card is not 

inserted is displayed.

Is an au Nano IC Card 04 inserted? (

z

P.8)

The power is turned off 

automatically.

Make sure the battery has not run out. (

z

P.11)

The power is turned off 

while the wake-up logo 

is displayed.

Make sure the battery has not run out. (

z

P.11)

 (out of service area 

icon) is displayed.

Is reception good enough? (

z

P.16)

Is the product within the service area? (

z

P.16)

Is your hand off the area around the internal 

antenna? (

z

P.7)

Is an au Nano IC Card 04 inserted? (

z

P.8)

The display or 

charging/incoming 

indicator illuminates/

flashes, but the 

ringtone does not ring.

Make sure the manner mode is not set. (

z

P.18)

A message indicating 

that charging is 

necessary is displayed.

The battery is almost empty. (

z

P.11)

Calls are automatically 

answered.

Make sure the manner mode is not set. (

z

P.18)

shv33_e.book  20 ページ  2016年1月27日 水曜日 午前9時55分

Summary of Contents for Aquos SHV33































Reviews: