3
Introduction
Security Code and Password
You have to use each security code to operate the EIS01PT.
You can use the security code and other passwords described below.
Take care not to forget your security code and passwords, because
they are required for performing various operations and using
subscription services.
●
Security Code
Usage
Example
①
Using the Answering Service (Voice Mail) and Call Transfer
remotely from a fixed-line phone
②
Making inquiries, applications, and changes while using
Customer Service Center voice guidance, and au homepage
③
Configuring “Other settings” in E-mail settings
Initial
Setting
The four-digit number you wrote on your subscription form
●
Pattern/PIN/Password
Usage
Example
Setting/Canceling Screen
lock, Remote control
lock, etc.
Initial
Setting
None
●
PIN code
Usage
Example
Preventing unauthorized
use of the au IC-Card by
a third party
Initial
Setting
1234
PIN Code
If the PIN code is incorrectly entered three times consecutively, the
PIN code will be locked. Use the PUK code to unlock the PIN code.
■
PIN code
You can set the EIS01PT to require PIN code entry every time the
power is turned on, to prevent unauthorized use of the au IC-Card by
a third party.
• At the time of purchase, the PIN code is not to be required to use
the phone. You can select “Lock UIM card” and set the PIN code to
be required. It is also required when setting “Lock UIM card”.
• The initial setting of the PIN code is “1234”. You can change the
PIN code to a four- to eight- digit number by selecting “Change UIM
PIN”.
■
PUK code
Enter the PUK code when the PIN code is locked.
• PUK code is an eight-digit number given at the time of purchase,
and is printed on the back side of the plastic card where your au
IC-Card is attached.
• When you enter the PUK code, set a new PIN code by selecting
“Change UIM PIN”.
• If the PUK code is incorrectly entered ten times consecutively,
contact an au shop, PiPit or the Customer Service Center.
◎
The PIN code is not initialized even after executing “Factory data reset”.