manualshive.com logo in svg

ATX VC19E, Manual

Share
Download
ATX VC19E Manual Download Page 3

i

Table of Contents

Table of Contents

Chapter 1 Overview

Package Checklist .......................................................................... 1-2

The VC19G/VC19E Mainboard .................................................. 1-3

Main Features ................................................................................ 1-4

FIC Unique Innovation for Users (NOVUS) -

Enhanced Mainboard Features and System Support ..................... 1-6

Chapter 2 Installation Procedures

Quick Reference (from Page 2-2 to 2-4) .......................................... 2-2

Mainboard Layout .................................................................... 2-2

1). Clear CMOS .................................................................. 2-3

2). Front Panel Block Cable Connection ............................ 2-3

3). CPU Fan Installation ..................................................... 2-4

1). Set System Jumpers .................................................................. 2-4

Clear CMOS: CLR .............................................................. 2-4

2). Install Memory Modules .......................................................... 2-5

3). Install the CPU .......................................................................... 2-6

4). Install Expansion Cards ............................................................. 2-7

5). Connect Devices ....................................................................... 2-8

Floppy Diskette Drive Connector ...................................... 2-8

IDE Device Connectors ..................................................... 2-9

Game/MIDI Connector (optional) ..................................... 2-9

Fan Connectors ................................................................. 2-10

Wake-On-LAN Connector ................................................. 2-10

Wake-On-Ring Connector ................................................. 2-11

Power Connectors ............................................................. 2-11

CD Audio-In Connector .................................................... 2-12

Quick Reference (German)

G-1

Quick Reference (French)

F-1

Quick Reference (Spanish)

S-1

Quick Reference (Japanese)

J-1

Quick Reference (Chinese)

C-1

Quick Reference (Simplified Chinese)

|||||||||||||

SC-1

Summary of Contents for VC19E





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands