manualshive.com logo in svg

ATX VC19E, Manual

Share
Download
ATX VC19E Manual Download Page 10

1 - 6

VC19G/VC19E Mainboard Manual

n

BIOS Guardian
BIOS Guardian effectively acts as a fire-wall against viruses that can at-

tack the BIOS while the system is running and by default is enabled.

WARNING:

BIOS Guardian must be disabled before reflash BIOS.

NOTE:
Please read Page 3-7 for detail information.

FIC Unique Innovation for Users (NOVUS) -

Enhanced Mainboard Features and System Support

n

LogoGenie
A user friendly GUI supporting Windows 95/98SE (not Windows 2000/

NT/ME/XP), LogoGenie allows you to customize, create or select a Logo

which will be displayed when the system is booting.

NOTE:
Please read Page 3-7 for detail information.

n

Easy Key
Instead of completing the multi-layered BIOS setup process these 3 Easy

Key functions provide direct access to Sub-Menu when completing BIOS

settings adjustments.

Easy-Keys are as follows:

Ctrl + c:

To enter clock settings menu.

Ctrl + p:

To load Performance Default settings and restart.

Ctrl + f:

To load Fail-Safe Default settings and restart.

Summary of Contents for VC19E





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands