MDU Solutions
®
– UCrypt
®
IP to IP – Quick Start Guide
5-3
CHAPTER 6: POWERING UP
6. POWERING UP
NOTE: The factory default confi guration is that all IP output streams are disabled so no unintended
output into the distribution network is possible. If the UCrypt device has been pre-provisioned
elsewhere then before powering, ensure that the network output cables are disconnected from the
distribution network to avoid unintentional service outages if there are overlaps between the output
IP addresses and existing services on the network.
Apply power and turn on the rear panel switch below the power receptacle. Boot-up will take approximately 90 seconds.
