2.4.2. Amplifier Front Panel Controls (Padding & Equalizer)
Figure #4: Front Panel Plug-ins
The QMP1000 Amplifier plug-in padding and plug-in equalizer locations are accessible by removing the front cover. Remove
the access cover from the front of the QMP1000 Amplifier module by turning the thumbscrew counter-clockwise. This will
expose two blocks of two PAD/EQ locations. By default, amplifiers are shipped with plugged in 0 dB values in all four
locations. Within a module, the PAD’s/EQ’s on the left side are connected to the RF Input and the ones on the right side are
connected to the RF Output (Single Stage Amplifier), or interstage (Dual Stage Amplifier).
Table #4: Plug-in PAD Specifications
Table #5: Plug-in 1 GHz EQ Specifications
Table #6: Plug-in 1.218 GHz EQ Specifications
Single Stage Amp Dual Stage Amp
MAXNET
®
II – QMP1000 Forward RF Amplifier – Installation & Operation Manual
2-3
CHAPTER 2: INSTALLATION
CHAPTER 2: INSTALLATION
