VIA KT133 ATX MAINBOARD
INTRODUCTION
1-5
¥
USB PORTS
Four Universal Serial Bus (USB) ports..
¥
IDE PORTS
Two channels of Ultra DMA33/66 Bus Master IDE ports (when VT82C686B is
installed on the board, it supports Ultra DMA /100).
¥
SUPER I/O PORTS
1.
Two high speed NS16C550 compatible serial ports (UARTs).
2.
One parallel port, supports SPP/EPP/ECP mode.
3.
One Floppy Disk Control port.
¥
IR PORT
One HPSIR and ASKIR compatible IR transmission connector (5-pin).
¥
MOUSE AND KEYBOARD
One PS/2™ mouse connector, One PS/2™ keyboard connector.
¥
3D SOUND
(
Optional
)
Integrated PCI-mastering dual full-duplex direct-sound AC97-link-compatible
sound interface.
(Note: KT133TXL and KT133BXL do not have the 3D audio
interface on the mainboard.)
¥
HARDWARE MONITORING
The hardware monitoring feature is designed on the board to monitor hardware
healthy status like system voltage, system temperature, and cooling fans. When the
hardware monitoring program is installed in the PC system, it will keep monitoring
the mainboard status. If there is something wrong, then you will receive a warning
message on the screen display so that you can take proper action to prevent your
system from damage.
There is the hardware monitoring program in the CD which comes with this
mainboard. If you feel like to use the hardware monitoring feature to monitor the
mainboard healthy status, please refer to the following for the procedure:
1.
Insert the CD disc into the CD ROM drive.
2.
Change the directory to "D:\Driver\Mainboard\VIA\Hardware Monitoring"
3.
Click on the "SETUP" icon and follow the screen instruction to complete the
setup.
