VIA KT133 ATX MAINBOARD
INSTALLATION
2-5
In order to use the ring-in signal to wake up your PC system, you will have to use
the
EXTERNAL MODEM
and have it connected to one of the
SERIAL PORTS
( COM1 or COM2 ) on the mainboard. When the mainboard detects the ring-in
signal from the serial port, the PC system will be powered on and start to receive the
incoming messages automatically..
To enable the Modem Ring-In feature, you have to run the BIOS setup utility and
enable the "Wake Up On LAN/Ring” option (it is located in the "POWER
MANAGEMENT SETUP”, please refer to Section 4.8 for the settings).
Note: This function is not available when using the internal MODEM card.
¨
WAKE ON LAN ( WOL )
There is a WOL connector CN16 on the mainboard which is designed to connect to
the signal from a LAN card which supports the Wake On LAN feature. When such
LAN card is installed, you may turn on the PC system from the remote server and
monitor the PC status. To enable this feature, you will have to use the BIOS setup
utility to enable the " Wake Up On LAN/Ring” in the BIOS setup program.
