CHAPTER 5: CHANNELS TAB
5-4
MDU Solutions
®
– UCrypt
®
IP to Analog 2
nd
Generation – Installation & Operation Manual
2. Select the desired function that the tool is intended for as some have more than one possible function, Figure 5-8. In
this example case it is enabling the selected sources (channels).
3. Click the first (left) Sources selector and choose the first channel of the range to be affected. This is either the single
channel you want to affect or the first in a range of channels.
4. Click the second Sources selector and choose the second Source of the range to be affected. For a single channel,
select the same channel as the first channel or select the end channel of the range of channels.
5. For selecting more ranges, click the
+
icon then repeat steps 3 and 4. A running total of the remaining items that may
be chosen is shown beside the
+
.
6. Click
Save
.
You are returned to the Channels tab where the publish button announces that ‘
x Changes are waiting to be published
’.
Click the
Publish
button.
5.7 Add an Input Stream
The Channels tab presents the input streams, streaming status of each resource and provides access to configuration pages.
If any channels are to be decrypted, that will be specified as the channel is added or edited so the Decryption Profile must be
“5.11.1 Decryption Profiles” on page 5-12
.
Procedure
This procedure explains how to add an input stream to any resource.
1. Click the
Channels
tab if it is not already selected, Figure 5-9.
2. Chose any resource in the list. In this example we modify
Resource 0.2
.
3. Click the channel’s
URL
which is the input multicast stream to which the channel will subscribe. There may already
be a factory default stream or one that has been previously defined.
1
2
3
4
5
6
Figure 5-8: Select Sources and Function
1
3
2
Figure 5-9: Click the URL Link of an Input Channel
