CHAPTER 5: CHANNELS TAB
MDU Solutions
®
– UCrypt
®
IP to Analog 2
nd
Generation – Installation & Operation Manual
5-3
5.6 Mass Configuration
Tools to allow mass configuration of all or groups of resources at one time speeds configuration when many resources need
to have the same operation performed. These tools are found within the
Resources List Headers
highlighted in Figure 5-6.
Each tool operates in the same manner in that you may select a single resource to act upon or any range of resources. The
resources or ranges do not need to be contiguous. Click the
Wand
icon beside the appropriate labels to access the tools.
5.6.1 Enabled Tool
•
Starting and stopping of streaming of multiple resources.
•
Used for enabling or disabling multiple resources.
5.6.2 Aspect Ratio Tool
•
Used for changing Aspect Ratio of multiple resources.
5.6.3 Audio Mode Tool
•
The Audio Mode tool is at the bottom of the page below the Audio Gain column.
•
Used for changing audio mode between Stereo & Mono of multiple resources.
5.6.4 Audio Gain Tool
•
Used for adjusting audio gain of multiple resources.
•
Allows setting the primary and secondary audio levels.
5.6.5 Channel Tool
•
Used for assigning RF output channels to multiple resources.
Procedure
This procedure shows how to use the mass configuration tools. We show one tool example, all tools function similarly.
1. From the Channels tab, click the
Wand
of any Mass Configuration tool, Figure 5-7.
Mass Configuration Tools
Figure 5-6:
Mass Configuration Tools
1
Figure 5-7:
Click Configuration Tool Wand
