6
ACTIVE ALARM PROCEDURES
IF ALARM SIGNAL SOUNDS:
1.
Operate Reset/silence button;
1. Immediately move to fresh air-outdoors or by an open door/window. Do a head
count to check that all persons are accounted for: Do not reenter the premises
nor move away from the open door/window until the emergency services
responders arrive, the premises have been aired out, and your alarm returns to
its normal condition?
2. Call your local Emergency Services Number or 911
(
)
Fill in your local Fire Department number here
3. After following steps 1-3, if your alarm reactivates within a 24 hour period,
repeat steps 1-3 and call a qualified appliance technician
(
)
to investigate for sources of CO and LP from fuel burning equipment and
appliances, and inspect for proper operation of this equipment. If problems are
identified during this inspection, have equipment serviced immediately. Note
any combustion equipment not inspected by technician consult the
manufacturers Instructions, or contact the manufacturers directly, for more
information about CO and LP safety. Make sure that motor vehicles are not, or
have not been operating in an enclosed area or in close proximity of other
vehicles.
Note: two self adhesive emergency contact tables are provided. The user must
add telephone numbers for the local emergency service provider and for a
qualified service technician. User must place one label next to the alarm. The
other label must be placed near a source of fresh air where you plan to gather
in the event the alarm indicates carbon monoxide presence
.
