Attwood X3-40 Operation, Maintenance & Installation Manual Download Page 5

Warranty Information

MotorGuide Limited Two Year Warranty............................................................ 1

General Information

Boater's Responsibilities..................................................................................... 3

Protecting People in the Water........................................................................... 3

Passenger Safety Message................................................................................ 3

Safe Boating Suggestions.................................................................................. 3

Product Overview

X3‑40/X3‑45/X3‑55/X3‑70 MotorGuide Trolling Motor........................................5

Specifications......................................................................................................6

Wiring and Battery Information

Wiring and Battery Information........................................................................... 9

Standard Practices and Procedures................................................................... 9

Battery Recommendations................................................................................. 9

Battery Precautions.......................................................................................... 10

Wire and Cable Routing....................................................................................10

Battery Connection........................................................................................... 11

Trolling Motor Installation and Operation

Mount Bracket Installation................................................................................ 13

Permanent Foot Pedal Mounting (Optional)..................................................... 15

Installing the Motor into the Bow Mount............................................................16

Removing the Motor from the Bow Mount........................................................ 16

Stowing the Trolling Motor................................................................................ 17

Deploying the Trolling Motor............................................................................. 18

Adjusting the Steering Tension (Hand‑Operated Motors Only)........................ 19

Adjusting the Motor Depth................................................................................ 20

Directional Indicator—Cable Steer Models....................................................... 22

Speed Control—Cable Steer Models................................................................23

Speed Control—Hand‑Operated Models.......................................................... 24

Battery Indicator Light (Digital Models Only).................................................... 24

eng

iii

  

Summary of Contents for X3-40








































Reviews: