IMPORTANT: If necessary, shim the rubber washers with 25 mm (1 in.)
outside diameter stainless steel washers to create a level mounting surface.
a -
Mount bracket
b -
Mounting bolt
c -
Rubber isolator
d -
Deck
e -
Washer
f -
Nylon locking nut
6. Once installed, the bracket should fasten securely and evenly, with the
latch pins in the slots, and release with a light, easy pull on the rope
handle.
Permanent Foot Pedal Mounting (Optional)
1. Determine a suitable location for the foot pedal with the trolling motor
deployed and in the stowed position. Ensure that there are no
obstructions beneath the boat deck that would interfere with the mounting
screws, such as bulkheads or boat wiring.
2. Once a suitable location is chosen, mark the mounting holes, using the
foot pedal as a template.
3. Use a 3 mm (7/64 in.) drill bit to drill holes through the boat deck.
a
b
c
d
e
f
56543
TROLLING MOTOR INSTALLATION AND OPERATION
eng
15
Summary of Contents for X3-40
Page 2: ...eng...