IMPORTANT: A minimum of four mounting bolts are required to mount the
trolling motor to the boat. Spread the mounting bolts as far apart as practical
for the most secure mounting.
a -
Mount bracket
mounting holes
3. Drill the mounting holes with a 7 mm (1/4 in.) diameter drill bit. Remove
any debris.
IMPORTANT: Using a larger drill bit, countersink the holes on fiberglass boats
to prevent cracking.
4. Insert the rubber isolators between the base of the mount and the boat
mounting surface. Place the tie‑down strap under the mount bracket,
hook‑and‑loop side down, with the buckle facing toward the outside of the
boat.
a -
Velcro tie‑down strap
b -
Buckle
5. Install the stainless steel washers and nylon locking nuts onto the
mounting bolts underneath the boat deck. Tighten them securely with
(7/16 in.) wrenches.
54516
aaa
a
a
a
b
a
54586
TROLLING MOTOR INSTALLATION AND OPERATION
14
eng
Summary of Contents for X3-40
Page 2: ...eng...