* The set data will "not" be saved.
* The set data will be saved.
maximum measured value of each model.
PP
：
The screen will be displayed in two sections.
Centering on zero, the upper section is the + peak holding and the
0.2% or more of the maximum measured value of each model.
* The unit symbol changes depending on the model.
PEAK
：
Hold and display the maximum absolute value during
measurement. Hold a torque value from 0.2% or more of the
lower section is the - peak holding. Both hold a torque value from
* Short press the "FUN" switch to confirm the setting. Next is the setting for changing measuring unit.
7-2.Change measuring unit (Initial Unit
：
N
・
m or N
・
cm)
・
You can change the measurement unit.
Switchable 3 units: N
･
m(N
･
cm), kgf
･
cm(gf
･
cm), lbf
･
in
* Short press the "FUN" switch to confirm the setting. Next is the setting for comparator HI.
* "DATA SAVE?" screen appears when you long press the "FUN" switch anywhere in the settings.
Select "OK" or "CANCEL" and press the "POW" switch to complete the setting.
7-1.Set measurement mode (Initial Setting: TRACK)
・
You can switch the measurement mode.
Switch between TRACK mode and PEAK mode by pressing the "DAT" switch.
The one with a black background is the one selected.
TRACK: The torque value applied to the detector is displayed as it is.
It is used to view measurements that change constantly.
7.Function settings and descriptions
To set each function, long press the "FUN" switch until you hear a beep.
"FUN" will be displayed at the top of the screen when the meter becomes the function setting mode.
If "FUN" is not displayed, long press the "FUN" switch again until you hear a beep.
* Please note that it is set longer so that the measurement mode will not be switched due to a malfunction
during measurement.
To complete the setting, long press the "FUN" switch again until you hear a beep.
The screen will look as follows.
Select "OK" if you want to save the data, or "CANCEL" if you don't, and press the "POW" switch.
"POW" Switch
"POW" Switch
"DAT" Switch
"POW" Switch
"DAT" Switch
"DAT" Switch
The display changes
every time the "DAT"
switch is pressed.
