136
Fig. 8.4a
J
Fig. 8.3
IMPORTANT:
The gasket “B” (fig. 8.2a - 8.2b) is the
element that guarantees the seal in the
gas connection. It is recommended that
it be replaced whenever it shows even
the slightest deformation or imperfection.
To replace the conical connector “C” or
the hose connector “D” it is necessary to
operate with 2 spanners (fig. 8.3).
After connecting to the mains, check
that the couplings are correctly
sealed, using soapy solution, but
never a naked flame.
Summary of Contents for PRF 960 GAS
Page 38: ...38 ...
