Parameter setup menu of the handle channel
Used to compensate for the temperature output error of the
soldering pencil.
Compensation range: -50
℃
~+50
℃
, -90
℉
~+90
℉
.
In case of a positive value, the handle temperature will
increase to the set value.
In case of a negative value, the handle temperature will
decrease to the set value.
The factory default is: 0.
The temperature value when the handle enters standby mode:
250
℃
/482
℉
: the minimum standby temperature.
300
℃
/572
℉
: the maximum standby temperature.
When the set actual operational temperature is less than the set
standby temperature, the product will enter standby mode at
the actual operational temperature.
The factory default is: 250
℃
.
The delay time (unit: min) taken by the product to enter
standby mode automatically when the User leaves the handle
unused for a long time:
OFF: the product will not enter standby mode.
1-120: the product starts standby function and enters standby
mode within the specified time.
When the set actual operational temperature is less than the set
standby temperature, the product will enter standby mode at the
actual operational temperature.
The factory default is: OFF.
Note: if the user discovers that the temperature is inaccurate when replacing the heating core or the handle,
it can be corrected through parameter modification as follows:
1. Set the handle temperature to be corrected at a suitable value, e.g. 350
℃
/662
℉
.
2. After the temperature remains stable, test the actual temperature of the current handle heater tip using
temperature tester, e.g. the actual temperature is 365
℃
/689
℉
.
3. The actual temperature is 15
℃
/27
℉
higher than the set temperature when a conclusion is drawn through
analysis.
4. Set the temperature compensation value as -15
℃
or -27
℉
, that is, compensate for the output temperature
error.
15
Temp Offset
Channel Set
〉
Temp Offset
Channel Set
GT-X150
0
Standby Temp
250
Standby Delay
OFF
Shutdown Delay
OFF
Shortcut Temp1
250
Temp Offset
Standby Temp
Channel Set
〉
Standby Temp
Channel Set
GT-X150
0
Standby Temp
250
Standby Delay
OFF
Shutdown Delay
OFF
Shortcut Temp1
250
Temp Offset
Standby Delay
Channel Set
〉
Standby Delay
Channel Set
GT-X150
0
Standby Temp
250
Standby Delay
OFF
Shutdown Delay
OFF
Shortcut Temp1
250
Temp Offset
