Press the key 1 in the system setup menu to enter parameter setup of channel;
Used to exit from parameter setup and return to the main
interface.
All parameters changed will be stored upon exit.
Reset the dialog box:
Select the function using “ ” or “ ”
and press Enter to execute this function.
Temp Offset: used to compensate for the
temperature output error of the handle.
Standby Temp: the temperature of the handle when
the system enters standby mode.
Standby Delay: open and close the standby mode.
Shutdown Delay: open and close the dormancy mode.
Shortcut Temp1: set temperature 1 for user’s quick call.
Total items of parameter setup menu of the handle channel
Shortcut Temp2: set temperature 2 for user’s quick call.
Shortcut Temp3: set temperature 3 for user’s quick call.
Fix Temp: after this function is started, the output
temperature stays at the set temperature value.
Temp UL: the maximum temperature that can
be set by the user in the main working interface.
Temp LL: the minimum temperature that can
be set by the user in the main working interface.
14
System Set
LCD Contrast
44
Mode
Nor
Net Address
1
Factory Default
Exit
ON
Reset
Factory default?
NO
YES
Exit
System Set
〉
Exit
System Set
LCD Contrast
44
Mode
Nor
Net Address
1
Factory Default
Exit
Channel Set
GT-X150
Temp Offset
0
Standby Temp
250
Standby Delay
OFF
Shutdown Delay
OFF
Shortcut Temp1
250
Channel Set
GT-X150
Shortcut Temp2
300
Shortcut Temp3
400
Fix Temp
OFF
Temp UL
480
Temp LL
250
