1
Parameter setup
Hold "MENU" key until the load is completed (100%).
50%
50%
Loading...
2
If the configuration page is under the protection of
password, the login to “Confirm” page shall be
authorized. Press "▲" or " " key to change the
input value, press “Enter" key to complete one input,
press the Rapid temperature key "3". Press the
“Logout” key to return to the main interface.
Login
* *
EXIT
9
If there is no password protection, or after the correct
password is entered, it will jump to the System
Parameter setup interface. At this time, the system
parameters can be configured.
Note: Do not change or insert and remove the handle of the soldering tool while setting the channel
parameters to avoid damaging the welding accessories and the Host.
Press the Key 1 to enter channel setup and the Key 2 to
switch to system setup.
10
3
System set
Languages
En
Unit
C
Password
* * *
Keypad tone
ON
LCD Contrast
4 4
4
Channel Set
GT-X150
Temp Offset
0
Standby temp
250
Standby Delay
OFF
Shutdown Delay
Shortcut Temp1
OFF
250
