2
General information
Technical documentation contains important infor-
mation for safe operation and for retaining func-
tional safety of the system.
)
To verify system set up, the set up protocol form is
to be signed and sent to the manufacturer.
)
Forms are available in this inspection book for use
in verifying single, regular and extraordinary safe-
ty checks. Use the forms to document inspections
and leave the completed forms in the inspection
book.
)
The system master forms must record changes to
the construction and changes to set up location.
2.1
Set up and test the system.
Safety relevant work on the system and safety in-
!pection! may only be done by per!onnel !pecifi-
cally trained to carry it out. They are designated in
general and in this documentation as technical ex-
perts and specialists.
)
Technical e’pert! are people (freelance e’pert
engineers, TÜV specialists) that may inspect and
assess due to their education and experience
with lift systems. They are knowledgeable in the
appropriate work safety and accident preven-
tion regulations.
)
Speciali!t! (competent people) are people ;ho
have !ufficient kno;ledge and
e’perience
;ith
lift systems and have participated in a special
factory training by the system manufacturer.
2.2
Hazard information
To become aware of the hazardous points and im-
portant information, the following three symbols are
used with the descriptive meaning. Pay particular
attention to text positions that are labeled by these
symbols.
i
Note! Labels information about a key function
or points to an important remark!
!
Caution! identifies a warning of possible system
damage or other operating company property
damage if the highlighted process is not done
properly!
Danger ! identifies a danger to life
and limb, if the highlighted process
is not done properly there is a mortal
danger!
52
JUMBO LIFT 3200 NT - HYMAX XX 3200 PH
19.05.2015
AD H9402
Summary of Contents for HYMAX XX 3200 PH
Page 3: ...ENGLISH Translation...
