ATT HYMAX XX 3200 PH, Operating Manual, Inspection Book

Page: 10 / 55

4.4 Commissioning
i
Before commissioning, a single safety inspection
must be done (use the "single safety inspection"
form)
If the lift !et up i! done by a !peciali!t (factory
trained assembler) then he can also do the safety
inspection. If the set up is done by the operating
company then a specialist must be tasked with the
!afety in!pection. The !peciali!t confirm! !eamle!!
operation of the lift on the set up protocol for single
safety inspection and releases the lift for use.
i
After commissioning, the set up protocol must
be completed and sent to the manufacturer.
4.5 Changing the assembly location
To change the assembly location the pre-conditions
must be met according to the assembly guidelines.
The location change is to be done according to
the following sequence.
) Move the lifting stage upwards to approx. 1,000
mm
) Loosen and remove all hose covers.
) Loosen base plate anchors.
) Lower the lift to the lowest position.
) Disconnect power.
) If necessary, disconnect the hydraulic lines on the
operating unit only, and seal them off with blind
stoppers.
) If necessary, suction off the hydraulic oil.
) Transport the lift with the unit to the new set up
location.
) Assemble the lift according to the procedure dur-
ing a!!embly and anchoring before fir!t commi!-
sioning.
i
Before re-commissioning, a safety inspection
must be done by a specialist (use the regular
safety inspection form)
4.6 Selecting the anchors
Anchor type
WITHOUT
floor cov-
ering
(screed/tiles)
with floor covering
(screed/tiles)
Heavy
DUTY
anchor BM 10-15/70/40
Liebig/Strongtie FH 15/50 B Anchor length de-
pends on the floor
covering
Fischer HSL-3-G M10/40
Hilti
Injection anchor
MKT VMZ-A 75 M12-
25/145
Hilti HIT-HY 200 with HIT-
Z M12
Fischer Highbond FHB II-A S
M12x75/25
i
Similar value anchors and other known brands
of anchor manufacturers can be used when
considering the conditions.
Use new anchors. The old anchors are
no longer fit for purpose!
56 JUMBO LIFT 3200 NT - HYMAX XX 3200 PH 19.05.2015 AD H9402