MAN - RTFO - REV: Org | D. Installation
12
setting is not correct, adjust the airflow to match the value on the label. Adjustments are accomplished by rotating the
knob located on the bottom of the gage (Fig. D.5).
D.3 Setting the Temperature
1. To change the RTFO temperature set point, press and hold the UP and DOWN arrow buttons at the same time
until the GREEN SV temperature display begins to blink.
2. Hold the UP arrow button to increase temperature or the DOWN arrow button to decrease temperature until the
desired set point is reached.
3. When the desired temperature set point is reached, press the red SET button (Fig. D.6).
Figure D.4 - Calibrated label
location on airflow meter
Figure D.5 - Airflow meter
Figure D.6 - Temperature Controller
