ATS R4520C, User Manual

Page: 40 / 61

Advanced Telemetry Systems, Inc. R4520C Reference User Manual R05-11A 40
You may also set the starting data block to be greater than zero. For example you may only want to check the most
recent data.
You can select the coordinate for the GPS data.
You can select the frequency data displayed with all six digits or with the two most significant digits suppressed.
Showing parameters in the offloaded data . This feature allows the data to include the scan parameters for each
scan started when offloading the data. When this feature is not selected, the offloaded data will not have any scan
parameters showing in the offloaded data.
The figure below shows downloaded data with first an Aerial Scan, then a Manual Scan, then a Stationary Scan.
The last column is an index into the parameter table displayed at the end of the data. The parameter number 0
appears here in lines 8 – 16. The parameter settings for those data points are displayed on line 33. To have this
extra information appear in your offloaded data you need to select yes in the “Show Parameters in Offloaded Data”
box of the offload screen.