ATS R4520C, User Manual

Page: 34 / 61

Advanced Telemetry Systems, Inc. R4520C Reference User Manual R05-11A 34
for Audio : The id number of the coded tag you are interested in. All other coded tags will be
silenced as they are decoded. All decoded tags will appear on the display and be
recorded as they are decoded even if they have been silenced.
With Background: When this is “NO” the receiver will silence all output except the tag with code that
has been selected. The selected tag’s audio will be slightly delayed because of the
amount of processing required to remove all the other audio. If there is another tag
in the vicinity that has a pulse that collides in time with the selected tag you could
hear occasional pulses that are louder.
To activate/deactivate the Background signal, use the or the key. These two keys are used to toggle
between the two choices.
Type the coded ID you are interested in and press “ Enter ”. All the Tag IDs will still be printed to the display as they
are deciphered and in the Aerial Hold mode they will still be saved to memory. It’s just the audio that will have the
remaining decoded IDs removed. This feature is used to allow positional tracking of the selected tag.
On the Display the selected ID will appear in the left hand corner with an ‘*’ appearing next to it as shown in the
example below.
6.0 ALL -Selecting all IDs for Audio
Note: Used only in Manual and Aerial Hold modes.
Pressing the “SHIFT” key followed by pressing the “ ALL ” key allows you to hear all the data be picked up by the
receiver. A message will be displayed to the screen indicating the audio filtering has been turned off.
7.0 NONE - Silencing all IDs from the Audio
Note: Used only in Manual and Aerial Hold modes.
Pressing the
“SHIFT” key followed by pressing the “ NONE ” key allows you to hear only the background signal.
Enabling this will cause the receiver to filter from the audio all the coded IDs as they are deciphered. All the Tag IDs
will still be printed to the display as they are detected and in the
Aerial Hold mode they will still be saved to
memory. A message will be displayed to the screen indicating the coded tag IDs have been silenced.