Advanced Telemetry Systems, Inc. R4500C Reference User Manual R10-12-A
29
3.4 PC MODE
This Mode is used when communicating with a personal computer (PC). The R4500C needs to be connected to a
PC using the supplied cable. The PC must currently be running the ATS supplied ATSWinRec communication
software. For more information see the sections of this manual covering “Downloading Data” and “ATSWinRec”.
3.5 CLONE
The Clone feature is used to transfer frequency tables and default settings from one receiver to another. The
optional blue clone cable with male DB15 connectors on both ends is required to use this function. Use the
following procedure:
1. Connect the Clone cable between the two receivers.
2. Turn both receivers on.
3. Select
CLONE
on the receiver you want to be the recipient of the data, press
“ENTER”
.
The receiver should respond with:
If a connection cannot be made the receiver will respond with:
If a connection is not made, turn both receivers off and repeat the steps outlined above.
Remember to select
CLONE
, and then press “
ENTER
” on the receiver you want to clone the information to.
