Advanced Telemetry Systems, Inc. R4500C Reference User Manual R10-12-A
16
Screen 4
To activate the Reference tag feature, use the
or the
key. These two keys are used to toggle between
the two choices.
If you entered
YES
for the reference tag, you will be prompted to enter the reference tag frequency, and the store
rate of the reference tag.
Screen
5
Reference Freq:
This is the frequency of a radio tag set up within range of your station used as a
check on the system. Since you will not need the same quantity of data you can
set up a longer store period to use up less memory. Instead of the strongest signal
strength being stored within the storage period, it will be the time of the first valid
ID detection.
Note: There is a limit on the number of reference transmitter points that can be
collected during each storage period. The maximum number is 16 (I.E. The
number of collocated codes on the reference frequency times one plus the number
of antennas should not be greater than 16).
An example dataset is shown below:
Date, Ant, Fr, Sig, Code, NumDet, NumMort
7/17/2009 12:47, 0, 150983, 105, 9, 18, 17
7/17/2009 12:47, 0, 150983, 133, 18, 36, 36
7/17/2009 12:47, 0, 150983, 135, 42, 35, 35
7/17/2009 12:47, 0, 150983, 119, 15, 15, 15
7/17/2009 12:47, 0, 150983, 122, 86, 40, 40
7/17/2009 12:47, 0, 150983, 121, 6, 42, 42
7/17/2009 12:47, 0, 150983, 121, 78, 46, 46
7/17/2009 12:47, 0, 150983, 135, 71, 34, 34
7/17/2009 12:47, 0, 150983, 141, 79, 48, 48
7/17/2009 12:47, 0, 150983, 135, 12, 12, 12
7/17/2009 12:47, 1, 150983, 106, 9, 25, 25
7/17/2009 12:47, 1, 150983, 126, 86, 31, 31
7/17/2009 12:47, 1, 150983, 119, 15, 29, 29
7/17/2009 12:47, 1, 150983, 120, 6, 38, 38
7/17/2009 12:47, 1, 150983, 132, 18, 33, 33
7/17/2009 12:47, 1, 150983, 136, 42, 30, 30
