Advanced Telemetry Systems, Inc. R4500C Reference User Manual R10-12-A
12
Screen
2
(The default frequency will be the lowest frequency of the receiver)
FR
1
indicates frequency table 1.
(00)
represents the first frequency in the list. The next frequency will be FR 1(01), and so on.
The cursor defaults to the 1 MHz position. Use the
or the
keys to move the cursor to the digit that needs
changing. When a number is entered in one location, the cursor will move to the right by one. Pressing
“ENTER”
will store the frequency, and move to the next frequency position in the table. When all the frequencies are
entered, the screen will jump back to the start of the Frequency Entry Menu.
If you have overlapping frequencies (i.e. 148.000-151.999) move the cursor to the 10 MHz position and then enter
the desired numeric value.
You may use the CHAN up
and CHAN down
keys at any time to scroll through the channels. These
keys can be used to make corrections or change an individual channel frequency.
2.0 SETUP Menu
The Setup Menu is used to set the clock, select transmitter type, default settings and delay times for the screen,
stationary hold, the channel delay and set the external data transfer settings. Setting the defaults first will make
starting Aerial or Stationary scans much easier and also reduce potential for errors.
To get into the “Setup Menu”, press the
“SHIFT”
key followed by pressing the “
SETUP
” key sequentially.
Again, to maneuver through the menu items, use the
or the
keys.
This is the view of the “Setup Menu”
To return to the Main Menu from the Setup Menu, press
“ESC”
.
2.1 Clock
