ATS Model PAVD4
User Manual
1 FEATURES LIST
1.1 Emergency Features:
•
Activates alarm for 15 seconds for immediate help within
the house (begins phone contact after 15 seconds)
•
The phone dials in sequential order, the assigned
emergency numbers from the phone book (up to 30)
•
Plays a pre-recorded or user recorded emergency
message
•
When the receiver answers the call and presses
‘0’, a
2- m i n u t e speakerphone conversation will be
activated
•
Before the end of 2 minutes, receiver will hear 2 beeps
and can press 1 5 to continue the conversation for
another 2 minutes or after 2 minutes, the phone will dial
the next emergency number from the phone book
•
During the emergency conversation, the receiving party
can press 1 9 to disconnect or caller can press Pendant
or SOS button to cancel the call dialing sequence.
•
If the called party does not answer after
1 minute
, system
proceeds to call the next emergency contact
•
The emergency call can work with system phone off-hook
with wireless pendant only
•
Pendant control range is over 100 feet in open area
•
Pendant is totally waterproof
Page 4
Page 25
8 Remote 911 Feature
Upon receiving an
emergency
call from the system, the
receiver
of the call can press 911 on their telephone
keypad. Upon hearing 911 pressed by the receiver of the
call, the system will hang-up the active call and dial 911(or
the specified emergency number stored in the 911 key).
The system will not call any of the other stored emergency
numbers once this feature is activated. The system does
not require ‘0’ to be pressed to acknowledge the call in this
mode.
9 911 Direct Feature
If the user
‘presses and holds’ the panic button for 5
seconds.
The user will hear the telephone beep and then
begin to dial the number stored in the 911 button (normally
911).
From the factory this will call 911 automatically.
This will bypass the dialing of the normal emergency
contact numbers and directly dial the emergency number
stored in the 911 key.
The system will not call any of the other stored emergency
numbers once this feature is activated. The system does
not require ‘0’ to be pressed to acknowledge the call in this
mode.
(
911 is programmed at the factory
into the 911 key, but
any number can be stored in the 911 key). See section
5.8.2 for instructions on how to store numbers other than
911 into the 911 key.
