MC22LV SERIES
– MASTER CLOCKS
REV 3/17/15
APPLIED TECHNICAL SYSTEMS
PAGE 13
The cursor will be flashing on the W of WDY (weekday).
Step #
- The #00 indicates that this is step 00 being displayed.
Day
- Program steps may be programmed for individual days, such as Mon or Tue, or for groups
of days such as WDY for weekdays. See below for the step abbreviations, and what they mean.
“Special Weeks” (Wk0 thru Wk9) can be created for your specific needs. For example, a Mon,
Wed, Fri week. See ADVANCED PROGRAMMING (Section 7.1) for more details. Press the
DAY [4] key to advance to the chosen day or group of days. The display will update as you press
the DAY[4] key. Once the preferred day or group is displayed, press [ENTER]. The display will
advance to the hour’s position.
STEP DAY
MEANS…
EDY
step occurs everyday
WDY
step occurs every weekday
WND
step occurs every weekend day
MON
step occurs every monday
TUE
step occurs every tuesday
WED
step occurs every wednesday
THU
step occurs every thursday
FRI
step occurs every friday
SAT
step occurs every saturday
SUN
step occurs every sunday
WK0-WK9
step occurs on days designated by custom week (see
Section 8.1)
Hours
- Enter the two digit hour at which this step is to be activated and press [ENTER]. The
display will advance to the minute’s position.
Minutes
- Enter two digits for the minutes and press [ENTER]. The display will advance to the
AM/PM position.
AM/PM
- Press the [AM] [1] or [PM] [2] key, then [ENTER]. The display will advance to the first
position after the word RELAY.
Relays
- Enter the number of the relays you wish to be energized by this program step. If a step
is entered and a relay that is already energized should stay energized until the next step, it is
necessary to enter the relay number again for this step. The relay settings show the state of the
relays at the programmed time of the step. The relay numbers will appear on the bottom
line as
you press the appropriate number. Pressing the same number again will remove the relay number
from the bottom line. Once the relays are set, press [ENTER]. The first step (00) is programmed.
The following display shows an example of all relays being activated on Weekdays at 10:00 AM.
#00 WDY 10:00 AM
Relays: 1 2
#00 WDY 00:00 AM
Relays: - - - - - - - -
Step
#
Day
Hours
Minutes
AM/PM
Relay
s
