12 12.22.2016
Section 5 Attaching the G2110E2
Figure 5. Collar attachment
Your G2110E2 has been optimized according to the collar dimensions specified during ordering.
The size of the collar is determined by the collar adjustment bracket and the main collar holes
(see Figure 3). To adjust the collar and/or attach the collar to an animal, the procedure is as
follows:
1.
First remove the collar adjustment bracket nuts and plate from the collar adjustment
bracket and remove the collar adjustment bracket from the main collar.
2.
Wrap the collar around the animal’s neck so that the extra length (if any) of the main
collar is tucked inside the main collar end with the VHF antenna. The extra length can
also be cut if desired.
